Fachverlag x-technik
search
 
Fräsmaschinen



  • thumbnail

    content type : FPT

    FPT STINGER 180 - Deep drilling test L 1020 mm with TULCE

    FPT STINGER 180 - Deep drilling test L 1020 mm with TULCE For more information visit www.fptindustrie.com   
    Video ansehen >>

  • thumbnail

    content type : FPT

    RONIN 400 - Roughing test - Maximum travel

    RONIN 400 is a horizontal travelling column milling machine able to accomplish a wide range of machining requirements for aerospace, mechanical and die & mould fields. For more info visit:...   
    Video ansehen >>

  • thumbnail

    content type : FPT

    Turning Test on FPT Tessen Mill Turn - with TUDD 5axis direct drive Head

    TESSEN is the travelling column type milling machine entrusted with the important task of reviving the success obtained throughout the world by the moving table milling machine mod LEM   
    Video ansehen >>

  • thumbnail

    content type : FPT

    FPT DINOSPIN - Machining test on a mold on hardened steel for a rear lamp optic

    DINOSPIN is a Gantry-type moving beam milling machine, suitable for high-speed machining. Here we show you a demo of micro-milling from roughing to finishing until Ø0,8 mm on hardened tool steel! For more info:...   
    Video ansehen >>

  • thumbnail

    content type : FPT

    FPT DINOMAX - Roughing Test with tools Ø66 - Ø80 - TUDD head

    DINOMAX is a moving bridge Gantry-style machine suitable for heavy-duty machining as well as high-speed cutting. The optimization of the structures, through the use of the most advanced FEM analysis, and the use of...   
    Video ansehen >>

  • thumbnail

    content type : FPT

    FPT SCUDERIA - NAS (National Aerospace standard) machining test with TTWT Head

    SCUDERIA is a Gantry-type moving beam milling machine, suitable for high-speed machining. The structure optimization, obtained through the most advanced FEM analysis instruments, and the use of driving systems of the...   
    Video ansehen >>

  • thumbnail

    content type : FPT

    FPT Castel Terus 180 - Cutting test on Aluminium aircraft components - TTWO head

    Aerospace challenges?!?! Find the answers with our Castel Terus 180 https://www.fptindustrie.com/en/detail/castel_terus/castel_terus_180/22/ CASTEL TERUS is a horizontal milling center with a moving column...   
    Video ansehen >>

  • thumbnail

    content type : FPT

    FPT TESSEN EVO - Roughing test Ø80 - Ø100

    TESSEN is the travelling column type milling machine entrusted with the important task of reviving the success obtained throughout the world by the moving table milling machine mod. LEM. In line with the last production...   
    Video ansehen >>

  • thumbnail

    content type : FPT

    FPT DINOMAX - Roughing Test with tool Ø125 - TUDD

    DINOMAX is a moving bridge Gantry-style machine suitable for heavy-duty machining as well as high-speed cutting. The optimization of the structures, through the use of the most advanced FEM analysis, and the use of...   
    Video ansehen >>

  • thumbnail

    content type : FPT

    FPT DINO - ROUGHING TEST with TVS vertical high frequency spindle

    DINO is a high-speed vertical machining centre with a fixed portal and moving table, ideally suited for complex machining even with 5 continuous axes. The optimization of the structures, through the use of the most...   
    Video ansehen >>

  • thumbnail

    content type : FPT

    FPT Dinospin_High Feed Roughing of Aluminum with Dinospin

    For more information about Dinospin click the link below: https://www.fptindustrie.com/en/detail/vertical_milling_m./dinospin/27/   
    Video ansehen >>

  • thumbnail

    content type : FPT

    Finishing of lamp mold in 52 HRC hardened steel on DINOSPIN

    DINOSPIN is a Gantry-type moving beam milling machine, suitable for high-speed machining. The structure optimization, obtained through the most advanced FEM analysis instruments, and the use of driving systems of the...   
    Video ansehen >>

  • thumbnail

    content type : FPT

    Fpt industrie s.p.a - dinomax 3 - linear motor - tupc hsk-a100 - roughing test Ø63/Ø100/Ø125

    For more Info about Dinomax: https://www.fptindustrie.com/en/detail/fresatrici_verticali/dinomax/7/ DINOMAX is a moving bridge Gantry-style machine suitable for heavy duty machining as well as high-speed cutting. The...   
    Video ansehen >>

  • thumbnail

    content type : FPT

    FPT Industrie S.p.A - RONIN 300 - SEL4 - DRILLING test Ø145

    RONIN EVO 300/400 is a horizontal travelling column milling machine able to accomplish a wide range of machining requirements for aerospace, mechanical and die & mould fields. Thanks to its innovative shape design and...   
    Video ansehen >>

  • thumbnail

    content type : FPT

    FPT TESSEV EVO - Drilling test on pre hardened steel performed on lateral side

    For more informations about Tessen Evo: https://www.fptindustrie.com/en/detai...   
    Video ansehen >>

  • thumbnail

    content type : FPT

    Drilling test on prehardened steel performed with Tessen EVO

    For more informations about Tessen Evo: https://www.fptindustrie.com/en/detail/fresatrici_orizzontali/tessen_evo/12/   
    Video ansehen >>

  • thumbnail

    content type : FPT

    FPT Industrie SpA - DINOX 350 composite material machining

    Thanks Di Lodovico   
    Video ansehen >>

  • thumbnail

    content type : FPT

    FPT DINOSPIN - Performing a semi-finishing and finishing on a pre hardened tool steel

    if you need more information about Dinospin you can visit our website: https://www.fptindustrie.com/detail/fresatrici_verticali/dinospin/27/ or contact us: infocom@fptindustrie.com   
    Video ansehen >>

  • thumbnail

    content type : FPT

    Drilling test on tool steel with Dinospin equipped with TULCE HSK63 18000rpm 5 axis head

    For more information about our Dinospin you can visit our website: https://www.fptindustrie.com/detail/fresatrici_verticali/dinospin/27/ or contact us infocom@fptindustrie.com   
    Video ansehen >>

  • thumbnail

    content type : FPT

    FPT Industrie SpA - SCUDERIA - High speed milling with Ø2 on tool steel

    FPT Industrie SpA - SCUDERIA - High speed milling with Ø2 on tool steel   
    Video ansehen >>

  • thumbnail

    content type : FPT

    FPT DINOX 220 IAT - Continuous 5 axes finishing with barrel tool on a plastic injection mould

    Thanks to BM STAMPI   
    Video ansehen >>

  • thumbnail

    content type : FPT

    FPT DINOSPIN_High Speed Finishing on Cast Iron Dies with barrel tool

    DINOSPIN is a Gantry-type moving beam milling machine, suitable forhigh-speed machining. The structure optimization, obtained through the most advanced FEM analysis instruments, and the use of driving systems of last...   
    Video ansehen >>

  • thumbnail

    content type : FPT

    FPT DINOSPIN with TULCE18 - Roughing test

    Roughing Test on pre hardened Steel block with FPT DINOSPIN and TULCE18 HSK63 using HSC Tools Ø32-40-50. For more information visit: https://www.fptindustrie.com/en/detail/fresatrici_verticali/dinospin/27/   
    Video ansehen >>

  • thumbnail

    content type : FPT

    FPT Industrie - DINOX Scuderia-TULCE18-1.2311-Mercedes Test

    For more information visit http://www.fptindustrie.com   
    Video ansehen >>


 Ältere anzeigen



Events / Termine


Special Digitalisierung der Zerspanungstechnik

WT_Technology-Center_Toolroom_vernetzt.jpg Die aktuell wichtigste Aufgabenstellung für Hersteller und Anwender von Werkzeugmaschinen ergibt sich aus der Digitalisierung der Produktionsumgebungen. Auf der EMO 2019 haben zahlreiche Anbieter IHRE Möglichkeiten für eine Smarte Zerspanung vorgestellt – mit unterschiedlichem Fokus spiegelten sich vielfältige Lösungen zur Vernetzung, Datenanalyse und zu neuen Services wider.
mehr lesen >>

Im Gespräch

/xtredimg/2019/Fertigungstechnik/Ausgabe283/19902/web/19-06-11_Zimmermann_Interview_Frieder_Ganzle_Bild_3.jpgFamilienunternehmen mit Ambitionen
Frieder Gänzle ist seit 2015 Mitglied des Führungsteams der F. Zimmermann GmbH, einem weltweit tätigen Hersteller leistungsstarker Portalfräsmaschinen und Horizontalbearbeitungszentren mit Sitz im schwäbischen Neuhausen auf den Fildern. Seit Juli 2018 ist er nun geschäftsführender Gesellschafter. Das Ruder übernommen hat er von seinem Vater Rudolf Gänzle, der als Gesellschafter noch beratend tätig ist. Wie sich der Übergang gestaltet hat, worin er sich von seinem Vater unterscheidet und wohin er das Unternehmen führen möchte, verrät Frieder Gänzle im Interview.
Interview lesen >>

Newsletter abonnieren